6 pot mono block Brembo calliper kit
5 Attachment(s)
Hey Everyone
Some of you may have seen my post in the "down under" section for the 6 pot Brembo calliper kit i have developed http://www.subaru-svx.net/forum/showthread.php?t=60084 well i have been working away trying to reduce the price for the kit and this is the where i am at...... 2 x 6 pot mono block Brembo callipers 2 x mounting blocks 2 x Brembo slotted rotors 355 x 32 8 x mounting bolts in high tensile steel AUD$2,500 This kit will fit SVX and STI |
Re: 6 pot mono block Brembo calliper kit
FYI i am also developing a Brembo 4 pot calliper rear set as well
|
Re: 6 pot mono block Brembo calliper kit
The kit also includes two sets of pads
|
Re: 6 pot mono block Brembo calliper kit
How badly does having such big front brakes and dinky rear brakes throw off the handling?
|
Re: 6 pot mono block Brembo calliper kit
Quote:
I plan on keeping this car for a long time so maybe a year or 2 down the road I will be getting these. |
Re: 6 pot mono block Brembo calliper kit
started working on the rear kit tonight
|
Re: 6 pot mono block Brembo calliper kit
Quote:
Weight transfer shifts forward when braking so at the moment with the 6 pots up front and larger rotors the car stops very well with no handling issues, 2 or 4 pots and larger rotor at the rear would have more of an effect on handling. the brake kit for the front and the kit i'm developing for the rear is based on a car 200kgs + heavier then the svx and with 335kw at the flywheel with same size brake booster upgrading the rear will be the test of whether brake bias needs adjusting but i think it will be fine |
Re: 6 pot mono block Brembo calliper kit
Quote:
i'm looking at a 2 and 4 pot kit |
Re: 6 pot mono block Brembo calliper kit
minimum wheel diameter is 18"
|
Re: 6 pot mono block Brembo calliper kit
Quote:
|
Re: 6 pot mono block Brembo calliper kit
Quote:
|
Re: 6 pot mono block Brembo calliper kit
it's not likely any one would just run 18s on the front then stock rears lol
|
Re: 6 pot mono block Brembo calliper kit
Quote:
|
Re: 6 pot mono block Brembo calliper kit
There were different size rotors he looked into using which would fit different wheels. Limiting this kit to 18" in my opinion will limit his customer base more than it already is.
|
Re: 6 pot mono block Brembo calliper kit
Quote:
there are two problems one is that even sti brembo brakes run 17" rims and two part of the efficency of better stopping power is the increased torque of a larger diameter rotor but ill see what i can do, is anyone interested in a small kit? |
All times are GMT -6. The time now is 01:59 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122