Engine Exhaust Header nut torques
I cannot locate any spec for the torque on the engine stud nuts securing the exhaust headers. Can anynoe post the info?
Thanx 1992 SVX 60K original miles Exhaust reassembly in progress:confused: |
22 ft/lb if using new nuts, 29 ft/lbs if using old ones.
It is on page four of section 2-9 in the 1992 service manual. I like to put a little anti-seize compound on exhaust fasteners to make them come off slightly easier next time. Doug |
Thanx!!!!!!!!!!!!!:)
|
All times are GMT -6. The time now is 06:34 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122