The Subaru SVX World Network

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)
-   Technical Q & A (https://www.subaru-svx.net/forum/forumdisplay.php?f=5)
-   -   Programming the Remote (https://www.subaru-svx.net/forum/showthread.php?t=26805)

svxthc 06-15-2005 08:41 PM

Programming the Remote
 
How do I program the keyless entry remote from another svx(94) to my svx(93)?? It was up in the how to documents but it must have been recently taken down. SVX-IW doesn't have the info on this either. If anyone has the instructions I'd be very thankful. Also, do you recommend sanding hubcaps before repainting them? Should I use a magic marker on the subaru letters? I know it's a lot of questions, but I'm hoping a veteran is roaming this forum right now because I gotta go and don't have the internet at my house! Thanks SVXERS :confused:

rvnmaniac 06-15-2005 08:59 PM

Quote:

Originally Posted by svxthc
How do I program the keyless entry remote from another svx(94) to my svx(93)?? It was up in the how to documents but it must have been recently taken down. SVX-IW doesn't have the info on this either. If anyone has the instructions I'd be very thankful. Also, do you recommend sanding hubcaps before repainting them? Should I use a magic marker on the subaru letters? I know it's a lot of questions, but I'm hoping a veteran is roaming this forum right now because I gotta go and don't have the internet at my house! Thanks SVXERS :confused:

Im no veteran but a newbie myself. i copied this from somewhere here:

Reprogramming the Subaru SVX remote controls
Use this procedure to program or reprogram one or more remote controls.
Programming is performed by putting the SVX security system into program mode, then pressing the button on the remote(s), then taking the security system out of program mode.
To enter the programming mode:
• Start the car.
• Turn the security system OFF if it is on (security switch light OFF).
• Turn the key off.
• Turn the key on, but don’t start the car.
• Turn the key off.
• Rapidly push the security switch on and off until the horn begins honking. In program mode, the parking lights will flash, and you will hear a clicking noise from the security system behind the glove box. (Possibly, newer models won’t have sound this because the security system was relocated to the trunk.)
To program the remotes to the system:
• To program one remote, press the remote button 4 times.
• To program 2 remotes press the remote button 2 times on each remote.
• To program 3 remotes, press the remote button 1 time on 2 of the remotes, and 2 times on the 3rd.
• To program 4 remotes, press the remote button 1 time on each remote.
Note: The parking lights will turn on when a button is pushed and turn off when a button is released.
To exit programming mode:
• Turn the key on.
• Turn the key off.
The parking lights will stop flashing and the security system is ready for use.

Matthewmongan 06-15-2005 09:26 PM

do they make universal car remotes?

svxthc 06-15-2005 09:35 PM

thanks henry, and i don't believe they make universal remotes for the svx
I guess I underestimated the SEARCH button after 240 posts ;)

Earthworm 06-16-2005 11:59 AM

Can someone submit that to the SVXipedia please?

ensteele 06-16-2005 02:55 PM

I have one and I can do that. :)


All times are GMT -6. The time now is 09:25 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122