The Subaru SVX World Network

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)
-   Technical Q & A (https://www.subaru-svx.net/forum/forumdisplay.php?f=5)
-   -   Where does my PS fluid go??? (https://www.subaru-svx.net/forum/showthread.php?t=11348)

Chicane 06-13-2003 05:48 PM

Where does my PS fluid go???
 
About every 3-4 weeks I have to pour in more Dexron 3 to fill it back up. I know where my oil is going (through the leaky seals), but what could be leaking on the PS system? I've replaced a few high pressure hoses on my past cars, but that's because they were over 20 yrs old. Anyone have any ideas on how to track it down?

- Rob

svx_commuter 06-13-2003 08:26 PM

Hi :)
I haven't had this problem yet.
I remember from reading other threads it's going into the rack boots.
They recommend Lucas PS additive to stop the leak. Add it before it's too late.

immortal_suby 06-13-2003 08:30 PM

I've had to replace PS return lines on both cars. They leak slow for a while but I never really saw any drips under the car.

SVXRide 06-14-2003 09:07 PM

Possibilities:
O-ring in pump
hoses (high and low pressure) from pump to rack
rack itself

I had to replace my rack because it was leaking so bad. Went ahead and replaced the high and low pressure lines at the same time.

-Bill

Chicane 06-16-2003 02:45 PM

I replaced the O ring when I got my car. How would I tell if its the rack, or the hoses?

- Rob

SVXRide 06-16-2003 03:30 PM

Get your car up on a lift, spray everything off (Simple Green, Brake Cleaner, etc. -- make sure everything has cooled down first), wipe it down, then run the car and see where the fluid is coming out.

immortal_suby 06-16-2003 04:32 PM

turn the wheel lock to lock when you do this to send some pressure through the system if you don't see any leaks right away

Porter 06-16-2003 04:39 PM

I'm drooling over an STi short ratio steering rack. I want one in my SVX badly. I'm sure it could be modified to fit. :D

dEaD 06-16-2003 09:50 PM

I had the same problem b4 then one day I wake up to go to work and I couldnt pull out to the driveway

anyway you should check the 2 hoses behind the engin they are bend too hard and thats what caused it to leak you should replace them also I bend the pipe comming out of the penion to the back to make the angle 90 degree between the 2 ends and since then no problem at all


All times are GMT -6. The time now is 09:38 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122