benebob |
11-29-2007 11:57 AM |
Quote:
Originally Posted by brjr549
(Post 511861)
Does anyone know of a place that would have a pre-bent roll cage for racing?
|
We had this place do up an 8 point cage for our SVX. What kind of racing are you thinking of doing? You're more than welcome to come take a look at the cage. I think material wise it ran around $400 once we got everything we wanted. Labor for installtion is gonna be a good 40+ hours minimum. I'd say we have 80 or so hours in ours at the moment and it is just about ready to get primed and painted.
http://autoweldchassis.com/rbc.ivnu
Of course it is a weld only cage. You're talking well over $2k for a bolt in cage and then it won't be as strong. Each santioning body requires something different so you want to know the min and max requirements for every type of racing you might ever want to do.
You won't find anything from Jegs that'll fit the SVX right although a late model Flying Turd/Rustaro cage will fit. The Camaro is actually smaller inside then the SVX so you'll loose a bit of space.
|