The Subaru SVX World Network

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)
-   Technical Q & A (https://www.subaru-svx.net/forum/forumdisplay.php?f=5)
-   -   engine code 23 (https://www.subaru-svx.net/forum/showthread.php?t=9952)

2 times 4 04-11-2003 04:50 PM

engine code 23
 
Well I finally pulled the codes for my 94 SVX. Before I did I cleared codes and waited for the problem again. Didn't have to wait long. I got code 23 and was glad there was only one. According to the list it refers to the engine revolution signal. I have no idea. Any help out there? Tried to look it up but with no success. Also tried to clear codes after and it all went as described but when I checked back to see if it was clear it still appeared, probably cause the problem wasn't fixed even though it didn't appear again right away. Thanks for any help with this.

kuoh 04-11-2003 05:20 PM

I believe 23 is the MAF sensor. The crank and cam sensors would be 11 and 13. What is the problem you're having with your SVX?

KuoH


All times are GMT -6. The time now is 02:08 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122