Side Markers
 

Anybody have the jdm sidemarkers forsale or know where I can get them?? Thanks


http://proxy.f3.ymdb.yahoofs.jp/user...x9jEHB_nXNpnJU

bumb.......anybody?!?

I thought I had posted a link to them before, but I don't see it. Sorry.

MotorSports Warehouse has them. They are here. :)

Thanks for the link, I like those side markers. Although I would rather have the kind like the ones on the svx in the picture i posted in the first post. If I can't find them I'll just get the Motorsport ones.

The UK-spec side markers are identical in every way to the JDM ones. You can get them from any Subaru dealer in the UK. In the past I have dealt with Bell-Colvill Ltd. their website and contact info is www.bell-colvill.co.uk I ordered the clear front turn signals from them, long before the JDM ones were available. These side markers are also known as "repeators"

Anyway, the part numbers are:

Lamp assembly, side turn (right)..84401PA020...£26.53-(US $46.89)
Lamp assembly, side turn (left).....84401PA030- £26.53-(US $46.89)

The prices may be a little higher now. These prices are from 2 years ago.

And here is a photo I took while over in England. I took the actual measurements off of this car for the exact mounting location. Maybe a member over there could pop off their repeator light and take a pencil "rubbing" to show you the exact shape of the hole needed to mount the lights. They just snap in.

http://www.subaru-svx.net/photos/files/svxcess/5399.jpg

.

Thanks! That's exactly what I was looking for. I just inquired them for a price for both. Hopefully not too much more than the price you gave me.

http://www.cardomain.com/member_page...98_15_full.jpg

i noticed the impreza side markers look alot like the svx's...i'm wondering if they would work?

svxistentialist is being generous enough to let me buy a set of sidemarkers off of him:D I feel like dancing now:banana: :domo:

I also have the "rubbing" that he gave me, showing the outline of the shape of the hole that they snap in to. Ask him. If he does not send you a copy, send me a PM and send you one.
.

How about asking svxistentialist for permission to post the rubbing in a how to for everyone to see?

Doug

I was thinking the same thing. If John sends it to me, I can put it into the How-To Docs. Thanks :banana:

I'm sure that would be good:)

And as Doug suggests, you have my full permission to use it for a How-To.:rolleyes:

Rubbing apertures is one of my big strengths in life.:rolleyes: :tongue:

Joe:)

How do we insure that the scale will remain the same? This is an exact tracing and cutting into metal is difficult enough. If the hole was cut too large...

I think we need a more exact way of doing this.

For those few who are considering installing the UK/JDM side markers, I would just send the an exact 100% copy.

I'm sure that would be better.:)