90 Legacy flywheel on SVX?
 

Does it fit?

Re: 90 Legacy flywheel on SVX?
 

Well, a 91 does. But it won't match your tranny.

Thanks Randy
 

Actually, its for my 5 spd swap. Flywheels are hard to come by in these parts.

Re: Thanks Randy
 

Ah. Then it will probably work.

why not get a lightened flywheel, if you need a new one... it'll help performance too

Are you buyin'
 

There is quite a difference between $60 and $450. I also like the smoother shifts provided by the heavier unit. I haven't driven one with either, so I am just speculating. Any input is very much appreciated.

Is there any reason not to use a '90 flywheel? Does it take the same clutches as the later ones?

The 90 Flywheel will work fine, I don't think there is any differance in any of the 90-up manual flywheels.

Well I got one for $50. It weighs about 18 lbs, so maybe there is some differences. I measured the friction surface and it is 225 mm like the others. So maybe I ended up with a light flywheel afterall.

Oh yeah, and I got all the pp and crank bolts too. Thanks for the tip, Huck.

that sounds like a light one.... they're usually in the 25lbs range...

Your welcome, that's what I did the write up for...to save others from my mistakes:D