Tom's Official Atco Thread
 

I'm here at Atco Raceway waiting for Tom and his brother to show up. Tonight we should have some video and pics... stay tuned :D

Can't wait:)

Grrr...
 

I'm pissed! :mad: Was going to show up with you guys. I got out of class in one hour. Went home and ran into a dead-end with making a cold-air intake.

I wanted to film Tom going down the strip and take a few pics. I hope you guys get some good pics and/or footage. :p Good luck! I will not leave my computer tonight until I read about the results. I say....Tom's 1st run will be around 14.1-14.3@94-96mph. 2nd run will be around 13.83-13.99@100-102mph. I like doing this. Place your bets......

Go Tom, Go!

well... hit a brick wall... no not literally Bill:p

The car shot out of the hole like no other but it died up top. At first I was thinking it was pulling timing but on the way home it hit me. I am still running the stock intake with the stock air box... to boot, I am running a at least year old dirty ass Fram filter:rolleyes: I meant to pull it and do a run when I was prepping the car last night but I totally forgot... So as it stands, the car still runs 13.9 but has a lot more to go

Tom

Have you seen that new intake that Kevin made?? :p

if its for the track, couldn't you custom fit one from APEXi or something? I know APEXi has dry filters that give very good air flow.

Hitting Epping tomorrow night.....

Unfortunately the lighting at Atco was terrible. By the times you guys started running it was already getting dark, so I had to bump up the ISO a lot in order to compensate. Before you guys came the mustang runs and corvette runs came out a lot better.

http://www.timeng.net/photos/atco/Atco1.JPG

http://www.timeng.net/photos/atco/Atco2.JPG

http://www.timeng.net/photos/atco/Atco3.JPG

Dan's 300ZX TT
http://www.timeng.net/photos/atco/Atco4.JPG

Here Tom performed a standing burnout in the pit area.
http://www.timeng.net/photos/atco/Atco5.JPG

http://www.timeng.net/photos/atco/Atco6.JPG

http://www.timeng.net/photos/atco/Atco7.JPG


http://www.timeng.net/photos/atco/Atco8.JPG

http://www.timeng.net/photos/atco/Atco9.JPG

http://www.timeng.net/photos/atco/Atco10.JPG

Tom,
Well, I guess you must have been babying it off the line:rolleyes::D
-Bill

My friend left the camera in his pocket so I have to get the other camera back from him before I can post the video....

I also will add that I got in for free :D.

Nicee pics:cool:

Cut a 1.90 with ease. 2.2 etc... for the second run. I am playing with the DCCD controller. It bogged on the second run with full lock and a 3krpm launch so once I get it right expect to see a 1.6 60' time with this fatty:D BTW more tests come monday when I grab a G-tech Pro RR and do some filter in/out testing

Tom

Tom,

The gold rims don't look bad, but the silver ones will look so much better.:p

Awesome pictures!