Crank grinding limits
Does anyone know what the limit is to grind the crank pins on our cranks before they are past the point of no return. I have a crank that all the rod pins are in the 2.0465-2.0455 range except the first which is 2.028 at its lowest. Is this crank able to be salvaged?
|
Re: Crank grinding limits
Well you can get good bearings as big as 0.075" undersize.
King Engine Bearings SI series rod bearings: CR4125SI075 Assuming your crank isn't bent it isn't anywhere near needing to go to a bearing that big. Why do you think your crank needs to be ground to begin with? |
All times are GMT -6. The time now is 12:33 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122