The Subaru SVX World Network - Side cladding question

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)

- Technical Q & A (https://www.subaru-svx.net/forum/forumdisplay.php?f=5)

- - Side cladding question (https://www.subaru-svx.net/forum/showthread.php?t=59377)

Sean486

03-07-2012 03:15 PM

Side cladding question

I have a piece of the side cladding that sits between the drivers door and rear wheel. All the holes on the sides and bottom are good but we noticed that the piece on the inside has two of the three holes torn out. The question is will this make any difference when installing it?

Broken are
http://i644.photobucket.com/albums/u...BrokenTabs.jpg

This piece
http://i644.photobucket.com/albums/u...6/c3b88c8a.jpg

1986nate

03-07-2012 06:15 PM

Re: Side cladding question

This is for the "studs" from the garnish holder that the 10mm nuts thread onto. You can't get those into place unless it's notched ;)

Sean486

03-07-2012 08:47 PM

Re: Side cladding question

Quote:

Originally Posted by 1986nate (Post 698986)

This is for the "studs" from the garnish holder that the 10mm nuts thread onto. You can't get those into place unless it's notched ;)

So you are saying it is normal?

redlightningsvx

03-07-2012 11:58 PM

Re: Side cladding question

Yes that is normal.

All times are GMT -6. The time now is 04:37 AM.