Tried a trick repair plastic mounting spuds
We are reinstalling some plastic surround parts for the steering column. We noted several of the plastic screw points (spuds?) were cracked and one was missing a chunk so the screw would not bite. We applied some Gorilla super glue to the cracks and then shrunk on some glue lined wire shrink insulation for more strength. On the one with the missing chunk we applied the shrink tubing and filled the hole with JB Weld. Seems like it worked.
So Gorilla super glue for the cracks Glue lined heat shrink tubing/insulation JB Weld YMMV Gwyn |
Re: Tried a trick repair plastic mounting spuds
there is some new stuff out there called Q-Bond it works very well for stuff like that.
http://qbond.net/ I don't work for them or anything but have been surprised at how well it works. |
All times are GMT -6. The time now is 08:42 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122