The Subaru SVX World Network - Replacement diff for JDM SVX

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)

- Technical Q & A (https://www.subaru-svx.net/forum/forumdisplay.php?f=5)

- - Replacement diff for JDM SVX (https://www.subaru-svx.net/forum/showthread.php?t=45734)

subbieatnz

08-05-2008 04:12 AM

Replacement diff for JDM SVX

I think my other 1992 JDM Svx has an stuffed rear diff. sadly i sold the spare one from my parts SVX. my question is can i use another LSD from another subaru and what ratio 1 do i need and what model subaru could one come off?
i dont know off any wreakers round town that has an svx in there yard.
Thanx

legacyau

08-05-2008 06:09 AM

Re: Replacement diff for JDM SVX

any 3.9 subi diff should work depending on output shaft compatability

subbieatnz

08-05-2008 06:22 AM

Re: Replacement diff for JDM SVX

Quote:

Originally Posted by legacyau (Post 558972)

depending on output shaft compatability

wat do you mean? are you meaning were the cv shafts go in? or where the drive shaft goes onto?

oab_au

08-05-2008 05:14 PM

Re: Replacement diff for JDM SVX

The ratio is 3.7:1 the same as any VTD equipped SVX. Nissan's used this ratio also.

Harvey.

legacyau

08-09-2008 07:53 AM

Re: Replacement diff for JDM SVX

Quote:

Originally Posted by oab_au (Post 559024)

The ratio is 3.7:1 the same as any VTD equipped SVX. Nissan's used this ratio also.

Harvey.

oops my bad, sorry for the bum steer it comes from looking at too many rear diffs under subaru's over the years :(

cam

All times are GMT -6. The time now is 10:55 AM.