The Subaru SVX World Network

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)
-   Technical Q & A (https://www.subaru-svx.net/forum/forumdisplay.php?f=5)
-   -   5 dummy lights? (https://www.subaru-svx.net/forum/showthread.php?t=39679)

richardstanley 07-05-2007 08:40 AM

5 dummy lights?
 
Driving my svx home this morning, and at a light i noticed i had 5 dummy lights? Steering, battery, brake lamps (or whatever) brake, and ABS.

Immediatley shut her down and checked under the hood... No loose connections, belts are in great shape, and are tight... Ugh, the power steering and brakes both work, was using a bunch of electrical stuff at the time with no problem.... Nobody here to check if my lamps arent working.
Took the negative off for half hour and they're still all on...

Any suggestions?

b3lha 07-05-2007 08:48 AM

It's a common problem. It's probably the rectifier in your alternator.

http://www.subaru-svx.net/forum/showthread.php?t=21852
http://www.subaru-svx.net/forum/showthread.php?t=34652

huck369 07-05-2007 11:29 AM

Yep...time for a new alternator

richardstanley 07-05-2007 12:55 PM

Yep time for a new alty :(
I messed around with it a bit today and they all went off. So at least now i can save some money for a new one lol.

wynndi 07-05-2007 01:53 PM

Alternator time!

svxcess 07-05-2007 07:19 PM

Definitely the alternator!

I had the exact same problem. When idling at night with the lights on (750rpm) the dummy lights would start to glow faintly. If I raised the rpms a little or turned off the lights, they went out. Checking them with a voltmeter, the lights started to glow when the voltage was 11.5V

I replaced the alternator with a new Subaru one and all the problems went away. Idling now with 13.9V.

.

Trevor 07-05-2007 07:26 PM

The dash indicator lights test circuit, incorporates blocking diodes to eliminate a sneak circuit which would otherwise exist. In an event involving faults within the alternator rectifier network, alternating current is induced on line. The result is pulses of reverse voltage, which pass the blocking diodes in the test circuit and energise the indicator lights.

kwren 07-07-2007 11:26 AM

Have you tried taking out the bulbs??
 
Quote:

Originally Posted by Trevor
The dash indicator lights test circuit, incorporates blocking diodes to eliminate a sneak circuit which would otherwise exist. In an event involving faults within the alternator rectifier network, alternating current is induced on line. The result is pulses of reverse voltage, which pass the blocking diodes in the test circuit and energise the indicator lights.

Have you tried taking out the bulbs??
Just kidding!
Trevor is right........ whatever he said!:confused:
Translation... :D TIME FOR A NEW ALTENATOR!

ensteele 07-07-2007 12:23 PM

Quote:

Originally Posted by kwren
Have you tried taking out the bulbs??
Just kidding!
Trevor is right........ whatever he said!:confused:
Translation... :D TIME FOR A NEW ALTENATOR!

I would rather put in a new alternator than take out those little bulbs behind the dash! :eek: :eek: :rolleyes: :) :)


All times are GMT -6. The time now is 07:35 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122