SS brake line installation
I know I need to use flare nut wrench to remove the oem lines. Does anybody know what size? metric or standard?
|
I am not sure of the size but they are metric. The whole car is metric. The normal sizes that I have experenced with the SVX are 10mm, 12mm, 14mm, 17mm, 19mm. the 12 and 14 are the most used on this car.
If you get a flare set of metric's that will cover the one you need. Steve |
Okay I bought a five piece set that has different sizes on each end. I hope I won't need two of the same size at the same time. You know one to stabilize and the other to break loose.
|
Its 10mm and you should only need 1
|
Quote:
|
But remember, when you think you will only need one, you will usually end up needing two. :D
|
Re: SS brake line installation
I don't know what a flare nut wrench is, but I helped a fellow SVXer replace his lines with just the standard wrenches and tools.
KuoH Quote:
|
All times are GMT -6. The time now is 09:39 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122