Brake band adjusting
I'm adjusting my brake band, as per the instructions in the how-to. They state "tighten adjust screw, the back off 3 turns." Which way is tight? Right would be decreasing clearance, and left is tighter clearance. Do I increase clearance to tighten it down? I don't want the band strut to fall off inside the tranny by turning it the wrong way.
|
I adjusted it all the way out for tighter clearance, and it hits second gear for just a half second and then falls into 3rd. I guess the brake band is gone shot.
|
clockwise = tight
you want to decrease clearance to tighten it down. too loose allows shifting straight from 1st to 3rd - as you are experiencing. |
okay, I adjusted the brake band all the way in and it works now, but it's worn out pretty bad.
|
All times are GMT -6. The time now is 09:46 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122