New Rotors and Pads!
My new iRotors cross drilled and slotted came in today! My Axxis MM pads are on the way, and I wanted to get personal feedback from anyone here on how they think this combo will work, as in, what will i feel over stock. My brakes have been trashed since May, so I'm not really sure what true stock feels like anyway. Anyways, please just tell me your opinion, ESPECIALLY those who might have this same brake combo. THANKS!
WOO HOO, My Svx will prowl Charlottesville again! |
what the heck guys? I depend on you all for my svx support and feedback, the things that keep me from selling this money pit:D so please keep me motivated and respond for gosh sakes:p
|
Bleed the system out with fresh fluid at the same time you install the rotors/brakes and you'll definitely feel a huge difference :D
|
Do yourself a favor
and check the condition of the piston seals and all the rubber components on the calipers. If they have tears or cracks, replace them. The parts are cheap, though the job can be difficult. It seems like a great time to do the job since you'll be tearing the system apart.
Todd |
All times are GMT -6. The time now is 09:35 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122