What else?
Well, now that I have my tranny removed, and therefore, half the car apart, is there anything I should be replacing at this time to prevent cursing in the future?
On the list already: Ball Joints both side, destroyed in disassembly Exhaust gaskets and bolts 3 new exh. manifold studs where they meet the exhaust pipe (any hints on replacing?) Oil pan gasket (leaking a little) Tranny hose clamps, destroyed in removal Also, how rubbery should the tranny mount be? It seems that mine is very jiggy, yet I see no cracks or other damage. Is that just the way it is? |
rear main engine seal
|
Is that where the oil leak is coming from? It seems to be coming from the back of the engine, I was just hoping :eek: that it was the oil pan and not the seal. So, how much work is replacing the seal?
|
its not so bad you just have to to remove the flex plate remove the old seal with a small screwdriver. grease the new seal and install make sure the seal is installed in far enough or it will just leak
|
All times are GMT -6. The time now is 05:42 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122