The Subaru SVX World Network

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)
-   Technical Q & A (https://www.subaru-svx.net/forum/forumdisplay.php?f=5)
-   -   Clutch kit for legacy 90 Tranny. (https://www.subaru-svx.net/forum/showthread.php?t=56340)

Alex-svx 01-12-2011 08:49 AM

Clutch kit for legacy 90 Tranny.
 
I just woundring about clutch kit for my car.

I use the stock clutch that came whit the Subaru Legacy 2,2L 5speed.
And this will not handle the H6 POWER :D

So i was thinking of bye one of these. And the stage 3 is almost the same price but will this fit?

Stage 2:
http://cgi.ebay.com/F1-RACING-STAGE-...item230c053cae
Stage 3:
http://cgi.ebay.com/F1-RACING-COMPLE...item230c0369b8

Thanks and this are for cabel clutch.

StatGSR 01-12-2011 09:49 AM

Re: Clutch kit for legacy 90 Tranny.
 
Looks like either one of those will fit.

the 2.2 cable transmission is compatible with any NA hydro 2.5 clutch. wrx clutches however are out of the question.

the only reason the 2.2 and the 2.5s are usually listed separately and with different part numbers is because the OD of the 2.5 clutch disk is physically larger than the oem 2.2 clutch disk. that said, a 2.5 NA clutch will work just fine with the 2.2 cable transmission.

just be sure to resurface your flywheel before install.

btw, i have a 2.5 clutch and pressure plate paired up with my 2.2 cable tranny and it works perfectly.

Alex-svx 01-12-2011 01:38 PM

Re: Clutch kit for legacy 90 Tranny.
 
Ok thanks alot for the answere. :) Then i go for the stage 3.

Quote:

Originally Posted by StatGSR (Post 666542)
Looks like either one of those will fit.

the 2.2 cable transmission is compatible with any NA hydro 2.5 clutch. wrx clutches however are out of the question.

the only reason the 2.2 and the 2.5s are usually listed separately and with different part numbers is because the OD of the 2.5 clutch disk is physically larger than the oem 2.2 clutch disk. that said, a 2.5 NA clutch will work just fine with the 2.2 cable transmission.

just be sure to resurface your flywheel before install.

btw, i have a 2.5 clutch and pressure plate paired up with my 2.2 cable tranny and it works perfectly.



All times are GMT -6. The time now is 05:09 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122