The Subaru SVX World Network

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)
-   Technical Q & A (https://www.subaru-svx.net/forum/forumdisplay.php?f=5)
-   -   how do i solve the water spots that show up in the taillights (https://www.subaru-svx.net/forum/showthread.php?t=54828)

zaueugen 06-15-2010 06:15 PM

how do i solve the water spots that show up in the taillights
 
:mad: how do i solve the water spots that show up in the taillights :mad:

SoCal LS-L 06-15-2010 06:56 PM

Re: how do i solve the water spots that show up in the taillights
 
I fixed mine with new foam gaskets from subarugenuineparts.com, and used silicon to seal around the seams and tabs.

1986nate 06-15-2010 07:04 PM

Re: how do i solve the water spots that show up in the taillights
 
I heated them up so that I could separate them. Left them open for a day or two, then heated them back up to put them back together. Then cleaned off the existing rubber seals and also used black RTV to ensure they were sealed up completely. Haven't had a problem since on my silver. Just need to do it to my other SVXi now.

Manarius 06-15-2010 07:33 PM

Re: how do i solve the water spots that show up in the taillights
 
Bake to get the water out. Electrical tape around the seams to keep the water out. Kind of ugly, but gets the job done.

SoCal LS-L 06-15-2010 07:58 PM

Re: how do i solve the water spots that show up in the taillights
 
Oh forgot....... the quickest way is to prop a blow-dryer to aim in either bulb hole and just leave it on high for a bit. Mine cleared out in about 30 minutes. THEN reseal them to keep the water out.

icingdeath88 06-15-2010 08:24 PM

Re: how do i solve the water spots that show up in the taillights
 
I would use something clear rather than something black like RTV, just in case it ends up being visible when you put everything back together. Clear silicone would be my choice. It's on my list of things to do as well... headlights though.

1986nate 06-15-2010 09:02 PM

Re: how do i solve the water spots that show up in the taillights
 
Quote:

Originally Posted by icingdeath88 (Post 650150)
I would use something clear rather than something black like RTV, just in case it ends up being visible when you put everything back together. Clear silicone would be my choice. It's on my list of things to do as well... headlights though.

How's it going to be visible? It goes in between the back of the assembly and the body. Its just there to help with the seal along with the existing rubber "gaskets".

Freeman 06-15-2010 10:00 PM

Re: how do i solve the water spots that show up in the taillights
 
Take apart the assembly, take out the defusers, reassemble the lights..


It seems like they keep getting stuck behind the defusers and removing them entirely might solve the problem... They look cool too.

icingdeath88 06-16-2010 12:41 AM

Re: how do i solve the water spots that show up in the taillights
 
Quote:

Originally Posted by 1986nate (Post 650157)
How's it going to be visible? It goes in between the back of the assembly and the body. Its just there to help with the seal along with the existing rubber "gaskets".

In case it get somewhere it shouldn't. Seems safer to me is all.

1986nate 06-16-2010 01:07 AM

Re: how do i solve the water spots that show up in the taillights
 
Quote:

Originally Posted by icingdeath88 (Post 650181)
In case it get somewhere it shouldn't. Seems safer to me is all.

Guess I'll have to show you pics next time I do it.:)
I don't see any way that it could get somewhere it shouldn't;)


All times are GMT -6. The time now is 10:09 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122