Altinator MOD.V4 Supplies?
Hi i am doing a altinator mod. v4 here is a neat little store that i bought some of my battery supplies.
http://stores.ebay.com/Genuinedealz if you take time a do your own looking around you can find the supplies you need there and no shipping.:) i bought my knukonceptz 4 gauge 3ft. of red and black for the wires at amazon.com http://www.amazon.com/KnuKonceptz-Ko...861109&sr=8-14 http://www.amazon.com/KnuKonceptz-Ko...861109&sr=8-15 and knukonceptz ring terminals http://www.amazon.com/KnuKonceptz-Ga...861253&sr=8-35 littlefuse mega fuse holder http://www.amazon.com/Littelfuse-298...9861628&sr=8-1 the little fuse 100amp or what ever one you want. http://www.amazon.com/Littelfuse-MEG...9861746&sr=1-5 here is some learing information on size wire and stuff for you brain smart guys http://stores.ebay.com/Genuinedealz/...elp-Guide.html I have a question about the 2 altinator plug wires that gets Ligthened and put under the manifold. they are 2 different gauges of wire. what are the gauges? can the be up graded to a larger size? 2 wires and how do you go about lenthing them cuting the wire? thanks. |
Re: Alternator MOD.V4 Supplies
.
Quote:
http://www.amazon.com/StreetWires-PR.../dp/B000OQPZN2 For a really secure electrical connection, you can't do better than the Streetwires Inter-Lok Power Rings. Compression-type fitting, tightened with a wrench instead of set screws. http://www.amazon.com/gp/product/B00...0ZBRXH01E2KYS5 . |
Re: Altinator MOD.V4 Supplies?
You mean Alternator:rolleyes:
|
Re: Altinator MOD.V4 Supplies?
Quote:
Winter's coming... and Reading's coming soon after. I'm sure you have a lot better things to do than sitting around spell-checking posts. Like fixing your idol problem. :lol: Or possibly getting it toad to OT's and letting him have a shot at it. . |
Re: Altinator MOD.V4 Supplies?
1 Attachment(s)
anyway i will work on my spelling but i would like to beat a dead horse on this altenator mod...
i plan in replacing postive post too. here i posted on this before here. http://www.subaru-svx.net/forum/show...ttery+terminal anyway when the mod is done i will have 3 cables connected to the postive battery terminal? 1. of them being the 4 gauge knukoncept wires coming from the altinator 2nd wire wire coming down from the fuse box? 3rd one then the one that get runs from the wiring harness? so my question is the one that comes from the harness goes to the middle of connector of the new battery terminal. I noticed that there is not a lot of wire there to play around with on the harness. then the other 2 wires where the bolts on the new postive post. can i put power rings on the postive post one from the 4 gauge wire and the other on the one from the fuse box? |
Re: Altinator MOD.V4 Supplies?
Quote:
Glenn |
Re: Altinator MOD.V4 Supplies?
1 Attachment(s)
Quote:
http://t3.gstatic.com/images?q=tbn:A...WLG7sbqLNIX-Lg The clamp is military-spec and is quite well-made and resists corrosion, Also made of Brass for marine environments Add one wire to each side as shown or clamp 2 of them on the same side. This gives you a lot of versatility and flexibility to run multiple wires compactly where room is tight, I have used these before without problem/ Just keep all your main harness and fusebox connections on the side of the battery and only the single alternator wire attached to the top. http://www.subaru-svx.net/forum/atta...1&d=1320135239 Available HERE You can use separate locations to attach cables by using battery side mount screw-in terminals. Same electrical connection. http://t3.gstatic.com/images?q=tbn:A...8QgoaPFxsqjzvO Quote:
'......... |
Re: Altinator MOD.V4 Supplies?
I plan on redoing mine with those brass Battery lugs. I noticed my filed down power ring on the alt is already looking pretty nasty.
|
Re: Altinator MOD.V4 Supplies?
here are some pics from my upgrade, I upgraded my cable that went to the starter as I did not like the corrosion and the state of that wire.
Now you will see that as of yet I do not have the mega fuse that is soon on my list. A pulled back view to see everything. http://localserver.no-ip.biz/Public/Alt%20wiring.jpg The engine ground, you can see it a little in the previous pic too. http://localserver.no-ip.biz/Public/...e%20ground.jpg a few months ago my positive terminal broke and I needed something in a hurry this was the only one available at the store I went to, it works nice and for this application is perfect but its too expensive and overkill really. http://localserver.no-ip.biz/Public/...0connector.jpg As mentioned earlier I used some of the koncepts cable for starter cable here is a pic http://localserver.no-ip.biz/Public/...connection.jpg And here is a pic of the connection at the alt, this is using a 1/4 battery lug connector so I did not need to file it down. http://localserver.no-ip.biz/Public/...0connecton.jpg |
Re: Altinator MOD.V4 Supplies?
Heres mine currently. I need to redo it.
http://i840.photobucket.com/albums/z...2/1fb176bf.jpg http://i840.photobucket.com/albums/z...2/5730992e.jpg The Charging post is looking gnarly.. http://i840.photobucket.com/albums/z...2/7b87f86a.jpg |
Re: Altinator MOD.V4 Supplies?
awesome website for all your battery needs and helpful if you plan on doing this modification
http://www.vteworld.com/index.php |
All times are GMT -6. The time now is 01:33 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122