Stage 2 - Z32 MAF Numbers?
 

I just recieved a "Z32 MAF" from budfreak. First off, this is NOT a complaint of any kind! Shipped quick and wrapped great! Just want to get this right since I have limited time to work on the cars these days.

It is an N60... does anyone know if it still works with stage 2? Will it just top out sooner? Should I just forget it and find a N62? Forgive my lack of knowledge on this, I've been lucky with maf mods in the past...

Hhmm, I must have missed this part of the conversation somewhere.:confused: Mine is an N60 too, Will these work?

P.S. Thanks Speedklix.:)

I've ordered ecutune so we'll see. I think it'll work, we probably won't get the same trottle response though and we'll have to upgrade in the future when/if it maxes out. I might get a new maf anyway, to go with my new plug... that was actually the original plan after I got my first "You can pull the MAF, but the wires better stay in there! :stern scowl:"... like he already knew I was coming :rolleyes: The n60, if it does run the same voltage as the N62 probably still won't "do it" for me, but I'll give it a shot so others will know.

If you do use yours, ignore the wire furthest from center.

I know the N62 is rated for at least 100hp more. Anyone with further knowledge on this compatibility issue, if it even is one?

I don't pay attention to the #'s so I'm not sure about n60's and n62's etc but if it's not a z32 maf meter it won't work. You really have to use the right meter.

I believe the N60 came on the z30 model....you'll want a MAF with a number like this --> 22680 30P00 A36-000 N62

-Bill

The guy I got them from had them labeled as Z32's and that's all I know. I've never heard of the N60 and N62 thing before. I guess we'll find out soon enough.;)

They need to have a gold label and the last 3 digits need to be N62... I doubt the N60 will work. It may be out of a z31

http://www.subaru-svx.net/photos/fil...sSVX/42411.jpg

Tom

Ussually they come from maximas, can't remember what was in the z31. could have been the same

there ya go... what color is the label?? I am guessing it is purple

tom

...yeah :( I might just compare to see. It is cheaper, so if it works it could save people some money. I'll be installing a new Z32 maf anyway all said and done.

I tried that one on my car when I got sold one labeled Z32 as well. No go man... it'll run but it will run like ****

Tom

I stink(hehe) I still have the one off of my black car (stage3 comes with a new one)... Let me know if you want it

tom

what sort of $$ you looking to get tom

im leaving soon to deliver a car to Columbus OH give me a call, I will send you a PM w/ my #

Tom

Will a bosch MAF sensor for a 95-96 300zx to the same trick?