Rear Side marker lights
Just bought some from USA (as spares) - only to find that the USA ones are fitted with bulbs!!! (here in NZ they are just reflectors).
So been looking through the Subaru wreckers here in Auckland but cannot find anything that fits.... So can anyone help next time they head to a spares wrecker (you pull) place, can they cut the rear wiring connector (side markers only) - leaving some wire on connector so that I can wire up here in NZ. PM so that I can arrange payment (Paypal or ?) thanks Stephen in NZ (1 OF 1) |
Re: Rear Side marker lights
Here in the UK,the rear sidelights are also just reflectors,I bought a pair from the USA and used 2 universal sidelight bulb holders from ebay,held in place with tape,easily wired into the existing wiring:)
|
Re: Rear Side marker lights
Wow - I am still learning about the differences of the SVX around the world - amazed that Subaru placed so much effort on cost down for various countries.
Would still prefer that someone can get me the mating connector & piece of wiring so that I don't have to tape the bulb into place. thanks Steve in New Zealand |
Re: Rear Side marker lights
Still interested in getting hold of a short length of wiring & connectors for the side rear markers - see my earlier email - PM if you can help, would use PAYPAL for costs..
thanks Steve in New Zealand |
Re: Rear Side marker lights
ok - have finally tracked down the p/n that I have for the rear markers -
84931PA010 Now all I need is the mating part & some of the wiring so that I can splice it into existing wiring loom - I need 2 of them for R & L. thanks if anyone can help. Steve in NZ |
Re: Rear Side marker lights
Quote:
|
Re: Rear Side marker lights
Thanks man
- it is crazy that you guys get the best rear lights (I mean we only get reflectors in the middle area too - but that was just a plug & play for me to "upgrade" from USA). But we get Glass up front (even if it is without the inner bulbs - only got 2 out of 3 fitted by law in NZ) - thinking about opening them up & removing the metal blanking plate.....in order to fit the tiny little lights in the inner locations. thanks PM or leave message here if you get them, we could do a swap for something from NZ??? regards Stephen |
All times are GMT -6. The time now is 01:41 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122