WTB: A/C Idler Pulley Assembly
The title says it all...I need a A/C idler pulley assembly...please PM
|
If you need the idler pulley because the bearing is bad,the bearing is easily replaced.Just look for a bearing supplier in your area. I just did mine.It cost me less than 10 bucks. The bearing was a SKF # 6202 2RS. If they do not sell that brand, they should be able to cross it over.:)
|
Pics say it all...I have no A/C hardware besides the compressor
http://www.subaru-svx.net/photos/fil...rrot/36120.JPG http://www.subaru-svx.net/photos/fil...rrot/36121.JPG so the mounting hardware would be helpful...if anyone has leads lemme know:)! |
Call me. 301-707-3437
|
I have a spare too, if eveythings else falls through...
|
All times are GMT -6. The time now is 08:33 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122