Sti Motor Mount On Svx
 

I Just Replace Mine. Stock Motor Mounts Are Too Expensive. I Bought The Sti For Sale On Subaru Parts. About $130 For Both. They Came With Mounting Plates That Have A Different Shape, So I Used The Ones On The Svx. Just With A Little Mod. Sorry I Did't Took Any Pictures. Best Best Choice. For Price And Performance!!!!!

Specialy With 5 Speed Conv. I Started Having Problems With My Clutch Cable, Braking Everey Week, Than My Clutch Fork Broke. End Up Replacing Clutch, Some Part Of The Outside Trany, And Motor Mount.... Just Be Careful...

any noticeable difference or performance gain?

was this all a result of a bad motor mount?

All This Problems Were Due To The Mount. Since The Engine Wasn't Staying On Place.

They Feel More Stiff. I Do Really Like Them.

Can you describe what was involved with the "little mod"? Can it be done with hand/power tools, or does it require access to a machine shop?

All There Is, Is A Mounting Plate In Between The Engine,and The Mounts. The Mounts Have 2 Escrews Sticking Out. That Are Closer To Each Other Than The Stock Motor Mounts. So All I Did Is Buy An Special Bit For My Drill, Make Bout 1/8 Of An Inch The Wole Bigger Towars The Center Until They Where Able To Mount On Top Of The Mounts.. And That Is The Only Difference From The Normal Mount Replacement.......