Spark Plugs
 

how would u go about changing them.

what plugs would u recommend

Take the old ones out, put the new ones in.

I'd recommend copper.

not that. how would i get to them being that there is hardly no room down there by the plugs

it's kind of a tricky operation at first but you figure it out as you go. first unscrew the bolt that hold the coil onto the plug, then pull the coil of the plug and use a series of extensions and a swivel for some of them and you;ll get r done after some time and learning. i use ngk u groove platinums from summit and they've proved very well. whatever you use make sure it's platinum.

How-To Documents...
 

http://www.subaru-svx.net/photos/user.php?How-To|14266

-Chike

You can get to the coil bolt on that last one on the drivers side without going through the wheel well if you use one of those socketless wratchet wrenches.

Also on http://svx-iw.com/

You can do it with a regular rachet too.

Stock SVX plugs 9.87 each. They work great unless you are going to run NOS.

Steve

the plugs from summit racing are much cheaper than that.:) ithink 2.50 a piece or so but i don't remember. give them a call.1-800-230-3030.

;) a universal worked for me :D