I'm Clicking...
 

Today we were doing a photo shoot and I relized I was clicking up front. Popped the hood and noticed the sound was coming from my crank pulley. I wasn't spinning true (Round). I'm going to replace it but is there anything else I should check before replacing it?

no....they have a history of going bad with age...post a picture of it once you take it off....it's most likely cracked

loose crank bolt.
 

As it is clicking, the bolt may have been a bit loose, for a while. So check the keyway, and look at the keyway in the belt sprocket behind it, to see if it is loose also.

Harvey.;)

She's going into the "Down" status for the next couple days till I get the Perrin lightened crank pulley. I don't think the bolt was loose considering Tom and I took it off and put it back on with the impact wrench.

I jsut noticed the clicking yesterday and you can ask Tom how anal I am about my Pearl eps. when it comes to the engine.

But when I dug into it today I took the belts off and went to loosen the bolt and it was already loose. Pulled everything off and everything looked ok. I think I'm still going to go with a lightened crank pulley only because mine has 96K on it. Everything looked ok but I'll take pics for you guys to diagnose.