Neon frustration
I hooked up my neons yesterday and they were working great. I turned them on tonight and blew the fuse. I checked the wiring and its all good but i keep blowing fuses when i flip the switch. Any advice?
|
What did you wire them into?
I used a relay, wired straight to the battery. This way there is little to no amp draw on the switch portion. Steve |
|
same. Conected switch to + and - terminals.
|
Oh. Well i did switch to battery and relay box (built in transformers). Nice drawing;) I like how you did your front neon
|
If you are using a relay and still blowing fuses then there are two reasons.
1. the relay is bad. Get a good 30amp headlamp one at local auto parts store. 2. The relay is wired wrong.:eek: Steve P.S. I am a inspiring artist inside. :p |
I am using a 3 amp fuse. Would a 5 amp be a good idea? I checked the wiring and its all right. I dug out the instructions and went over all of it
|
I would say atleast a 10 amp fuse. 3 amp is way to small for most applications in a car other than the clock.
Steve |
Ok. I called the company and they told me use 3 amp but it just seems too small thanks for your help.
|
All times are GMT -6. The time now is 04:12 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122