Cracked a Flex Plate or worried about it??
 

If you have your engine and/or transmission out this is a required purchase.

Subaru Part #12332AA071

This is the Phase II flex plate that is a direct bolt up for our engines and our Phase I transmissions...

The old style plates are 2.05mm thick according to my micrometer

The new style plates are 3.25mm thick

Just figured someone may need this info. If you have a hard time finding one, let me know, I ordered 3 and need one, so there are two on the shelf

Tom

Re: Cracked a Flex Plate or worried about it??
 

http://i65.photobucket.com/albums/h2...1010091536.jpg

Sorry for camera phone pic but you get the picture

Tom

Re: Cracked a Flex Plate or worried about it??
 

How much are you selling the ones on the shelf for? I believe I have an order in for heads and steering rack maybe we can work something out once I send back the cores?

Re: Cracked a Flex Plate or worried about it??
 

Yea, I will throw one in for you free of charge. I am hoping to have the heads back from the machine shop next week so I can begin lapping the valves and reassembly. The rest is waiting to ship with the heads correct?

Tom

Re: Cracked a Flex Plate or worried about it??
 

Interesting design. Thicker material should definitely help.

-Bill

Re: Cracked a Flex Plate or worried about it??
 

Thank You!
The heads, steering rack and Group N mounts can pretty much come together I am not in a rush just yet since I ordered my engine seal kit last week.
As soon as the heads arrive I will pull mine and get them out to you. Would you perhaps like me to ship my flex plate back I don't believe it is cracked or damaged I just felt like upgrading.

Re: Cracked a Flex Plate or worried about it??
 

The rack and the old heads are all I will need back from you. I have a ton of flex plates here already, but there is no good use for the old ones

Tom

Re: Cracked a Flex Plate or worried about it??
 

its drilled for weight. The PhaseII flex plate is still heavier even with all the material removed.

Tom

Re: Cracked a Flex Plate or worried about it??
 

YT,
What are the symptoms that indicate one might need the new beefier plate?

Re: Cracked a Flex Plate or worried about it??
 

A broken one

Tom

Re: Cracked a Flex Plate or worried about it??
 

Har har...what would one notice when driving with a broken one?

Re: Cracked a Flex Plate or worried about it??
 

the total lack of any movement from the car. Broken plate does not turn the TC and then the shaft doesn't turn and then the pump doesn't make pressure and since there is no pressure there is no movement. Engine will run fine and rev fine but the car will not move.

Re: Cracked a Flex Plate or worried about it??
 

If it's broken that bad, the car won't start, the starter would turn the TC and the trans, but not the engine...

Generally if it's cracked, it will make a loud clicking at times.

Re: Cracked a Flex Plate or worried about it??
 

but if the car is already running.... it will free rev. :lol:

maybe you should tell this story...aren't you the king of cracked FP's? :lol:

Re: Cracked a Flex Plate or worried about it??
 

huh?? I had one that I found to be mildly cracked when I pulled the trans???

Now failed tranny's? Yeah you could call me the king of them... ;)