AMR Radiator install and Fitment
 

Ok so I received the prototype AMR Radiator today I took many many pics and showed each step in the install process. I hope you like it.

First was the un-boxing,
One of the first things I noticed besides the quality of construction AN Fittings for the transmission cooler lines.
I have a manual transmission so I didn't need to do anything with them but I spoke to Andy and he said the radiator will come with the AN to barb fitting, http://localserver.no-ip.biz/Public/...20fittings.jpg
So putting the fan shroud on the drivers side went on perfectly I did run into a little issue putting the passenger side shroud on though
http://localserver.no-ip.biz/Public/...20unboxing.jpg
http://localserver.no-ip.biz/Public/...0unboxing2.jpg
http://localserver.no-ip.biz/Public/...0unboxing3.jpg


http://localserver.no-ip.biz/Public/...20Fittings.jpg
http://localserver.no-ip.biz/Public/...0Fittings2.jpg

http://localserver.no-ip.biz/Public/...20assembly.jpg
http://localserver.no-ip.biz/Public/...0assembly2.jpg

http://localserver.no-ip.biz/Public/...misfitment.jpg
http://localserver.no-ip.biz/Public/...isfitment2.jpg

Re: AMR Radiator install and Fitment
 

I wanted to get this installed and going and I have a spare passenger side shroud so I modified mine to fit.
http://localserver.no-ip.biz/Public/...20modified.jpg
I did the wiggle/jiggle to get the feet pegs set in and it dropped in perfectly.
http://localserver.no-ip.biz/Public/...0installed.jpg
http://localserver.no-ip.biz/Public/...installed2.jpg
http://localserver.no-ip.biz/Public/...installed3.jpg
There is lots of room between the fan shrouds and the engine for some of the more modified svx's out there
http://localserver.no-ip.biz/Public/...installed4.jpg
the view from the underside
http://localserver.no-ip.biz/Public/...ide%20room.jpg

I vacuumed out the system and it held great and refilled
http://localserver.no-ip.biz/Public/...and%20fill.jpg
A couple of videos of that vac and fill, and how good it cools

Re: AMR Radiator install and Fitment
 

Re: AMR Radiator install and Fitment
 

Some may notice that the top rad mounts are missing a bolt each, they are broke off, been that way since I had the car it never affected anything so I never bothered with it.

http://localserver.no-ip.biz/Public/...pic%20(11).JPG

Re: AMR Radiator install and Fitment
 

So the only problem is the fan shroud mounting points don't line up?

Re: AMR Radiator install and Fitment
 

only the passenger side shroud, and not far off, I slotted out the tabs on the passenger side fan shroud so I could install it in the car.

Re: AMR Radiator install and Fitment
 

Thanks for the great update.

Re: AMR Radiator install and Fitment
 

You are Welcome

Re: AMR Radiator install and Fitment
 

Just paid....if this is my last post, it's beacuse my girl friend killed me......send help.

Re: AMR Radiator install and Fitment
 

:lol: ok will do

Re: AMR Radiator install and Fitment
 

I placed my order today.

Re: AMR Radiator install and Fitment
 

I just checked out your videos. What type of coolant are you running?

Re: AMR Radiator install and Fitment
 

The long life Asian formula, its red, I don't really know much more about it, it was reasonable price at the parts store.