The Subaru SVX World Network - Transfer Clutch Plate Clearance Needed ASAP

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)

- Technical Q & A (https://www.subaru-svx.net/forum/forumdisplay.php?f=5)

- - Transfer Clutch Plate Clearance Needed ASAP (https://www.subaru-svx.net/forum/showthread.php?t=30960)

dan_j_b

01-18-2006 05:34 PM

Transfer Clutch Plate Clearance Needed ASAP

Could someone please look in their official subaru svx service manual and tell me when the specs are to determine what transfer clutch pressure plate I need. I am trying to get this done tonight

Dan

Earthworm

01-18-2006 05:47 PM

I'm not sure but I don't think you know until you take it apart.

dan_j_b

01-18-2006 05:55 PM

I have it apart. I"m trying to determine if it is worn out or not

Earthworm

01-18-2006 06:00 PM

Compare what you have with the thicknesses listed on Subaruparts:

Reference Link

dan_j_b

01-18-2006 06:04 PM

you mean the thickness of the pressure plate? That doesnt help me. I just need to know how thick the gap from the pressure plate to the snap ring is supposed to be. Mine is a littlle over 1mm

Earthworm

01-18-2006 06:05 PM

That's beyond my current knowledge and I don't have my FSM's with me.

dan_j_b

01-18-2006 06:07 PM

doesn't anyone have their manual handy?

oab_au

01-18-2006 06:17 PM

Quote:

Originally Posted by dan_j_b

you mean the thickness of the pressure plate? That doesnt help me. I just need to know how thick the gap from the pressure plate to the snap ring is supposed to be. Mine is a littlle over 1mm

This is a bit iffey Dan, but the Limited Slip clutch that my Aust car has, 1 plate less than the Transfer clutch, that you have. WSM has the clearance as 0.2mm to 0.6mm, with 1.6mm as the allowable limit. As yours has the extra plate, the 1mm you have may be OK.

Harvey.;)

dan_j_b

01-18-2006 06:18 PM

Thanks, Harv

All times are GMT -6. The time now is 05:22 AM.