front-end rumble/vibration
Hello svxers,My 96l,43K has gradually developed a "rumble/vibration" in the front-end.It happens when starting from a dead stop to 5-10 mph.It seems worse when turing the wheel either way.Am also noticing it occurs briefly when trany shifts into higher gears.Any help would be greatly appreciated!
|
My car has been doing that for sometime now. I am going to going to the alignment checked. I looked at everything else, tie rods, Bj's, bushings and nothing seems to be loose or worn out inthe front end. I let you know when I know.
|
I just got the alignment checked and it was not that bad. The toe was a little out and not in. The noise I get is from the tires on the back. The inside edges of the tires is not round. It has a wash board apearance. I had these tires on the front for too long and this is how they wore. Ran too a low a pressure also and took too many corners too fast. Not a good thing to do to Yoko AVS db's. I should have rotated them more often. Nothing is loose and all the bearings feel okay.
I actually post a similar question back in the fall and the response was..."Look at your tires" I should have listened.:rolleyes: |
I've had this same problem and put it down to tires.
|
All times are GMT -6. The time now is 12:02 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122