alternator dis-assembly
How tough is it to take apart and put back together an alternator for repainting?
|
I tried to take it apart once. Getting the bolts out is the easy bit. According to the service manual you have to heat up the bearing box with a big soldering iron until it expands enough that the shaft can be removed.
I gave up after realising that my soldering iron was too small and not hot enough. Of course, when you heat it again to put it back together, that might damage your new paintwork Phil. |
Thank YOu!
|
Ask Doug Mohr... I know he powder coated a couple...
He took his apart. |
All times are GMT -6. The time now is 04:04 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122