Re: ECUtuner software and Select Monitor Interface
Software runs fine on windows 7 64..has also been reported to work fine on windows 8. Are you sure you have .net 3.5 installed? Windows 7 doesn't come with it. If you copy and paste the error or tell me what it is I'll help.
|
Re: ECUtuner software and Select Monitor Interface
Windows 7 comes with .net 3.5, but I don't think it's enabled out-of-the-box. Have to go to "turn windows features on/off", and enable it, and restart. No error code, just "This program has stopped".
|
Re: ECUtuner software and Select Monitor Interface
windows 7 comes with .net 4. you need to use the link on my website to download the correct .net version from microsoft. It's on the ecutuner page in the paragraph explaining that you need it.
http://www.ecutune.com/ECUtuner.htm |
Re: ECUtuner software and Select Monitor Interface
Right, tried that. When you run the installer, it tells you to go to the windows features on/off menu.
|
Re: ECUtuner software and Select Monitor Interface
Quote:
|
Re: ECUtuner software and Select Monitor Interface
also, did you install the d2xx or vcp drivers from ftdi? You need the d2xx drivers. http://www.ftdichip.com/Drivers/D2XX.htm
|
Re: ECUtuner software and Select Monitor Interface
Got the right ones. full package is downloading now, I'll let you know what happens.
|
Re: ECUtuner software and Select Monitor Interface
ok, one last thing to check just in case...make sure you are double clicking the right ecutuner file...there are a few files named ecutuner in there including and installer you don't have to use but can if you want. you might just be installing it over and over again. the correct file to launch the actual ap is the .exe
|
Re: ECUtuner software and Select Monitor Interface
"Failed to load FTD2XX.dll. Are the FTDI drivers installed?"
|
Re: ECUtuner software and Select Monitor Interface
doesn't sound like it...did you plug your ftdi ttl232r-5v cable in after running the ftdi d2xx driver installation program and did windows give you a popup when you plugged the cable in saying it recognized the cable and installed it successfully?
|
Re: ECUtuner software and Select Monitor Interface
Nope just tried that on my desktop, and now it stopped giving that message.
|
Re: ECUtuner software and Select Monitor Interface
so all is good now? I need to go watch magnum on netflix
|
Re: ECUtuner software and Select Monitor Interface
Quote:
|
Re: ECUtuner software and Select Monitor Interface
do you have the cable plugged in when you are trying to open the program?
|
Re: ECUtuner software and Select Monitor Interface
Yes. ......
|
All times are GMT -6. The time now is 03:02 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122