6-speed issue: throwout bearing clip wavy spring absent
 

Hey all. I just swapped in the motor from my parts car into my 6-speed swapped car. We had some issues getting it in, and the little pressure plate clip that the throwout bearing attaches to kept coming out, so I kept putting it back together and trying again. We finally got it in and then as I'm buttoning up stuff, I find the wavy spring for the clip on the ground under the car :eek:. So, basically I want to know if it's driveable without that or if I have to pull the motor out and put it all back together.

Re: 6-speed issue: throwout bearing clip wavy spring absent
 

After talking it over with a local suby mechanic I've elected to pull the motor... Fml