The Subaru SVX World Network

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)
-   Technical Q & A (https://www.subaru-svx.net/forum/forumdisplay.php?f=5)
-   -   Mouse belt (https://www.subaru-svx.net/forum/showthread.php?t=14172)

Gargoyle 11-03-2003 10:31 AM

Mouse belt
 
The only problem i have with my SVX, is my drivers side seatbelt keeps me locked in if i forget to open my door BEFORE i shut her down.
Im getten into a better habit of opening the door before i shut it off ,( but i dont like haveing to do that ) and it still bugs me when i forgett & have to turn the key back on to get it to move ( only the driver's side does this & im fiarly certain it shouldnt.)
If any-one has an idea as to why let me know thx Gar.

svx_commuter 11-03-2003 10:52 AM

I unclip the belt before I get out.

quiquetupper 11-07-2003 01:49 AM

Seat Belt fix
 
Gargoyle
If you read your manual,it says there how to correct that problem:Look back at your rear seats,you will see two tabs coming out of the butt cushions,one on each side,pull them out and you will be able to lift the cushion,on the side of the rear armrest there is a hole,you have to insert there an allen wrench,I do not remember the size but it cones with your car in the center console,and turn clockwise for at least one turn,test it first what is needed,and your seat belt will be fixed.

Gargoyle 11-07-2003 03:12 AM

Re: Seat Belt fix
 
Quote:

Originally posted by quiquetupper
Gargoyle
If you read your manual,it says there how to correct that problem:Look back at your rear seats,you will see two tabs coming out of the butt cushions,one on each side,pull them out and you will be able to lift the cushion,on the side of the rear armrest there is a hole,you have to insert there an allen wrench,I do not remember the size but it cones with your car in the center console,and turn clockwise for at least one turn,test it first what is needed,and your seat belt will be fixed.

:D cool & many thanks.
I guess i just didnt even stop to think that would be in there. That will teach me to think. ( or perhaps to re-read the entire manual )
At any rate thanks again. I will let ya know how it goes;)


All times are GMT -6. The time now is 08:51 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122