Power Steering ..SqUeeAlL.. ?
My PS unit is working at about 98% now after O-ring and fluid change!
But why do I get a 5 to 10 sec squeal when starting up after long park.. . :confused: Thats the only time! Never squeals any other time.. turning sharp.. or ?? Belt is tight.. . Hmmm? :eek: Thanks.. :D |
Re: Power Steering ..SqUeeAlL.. ?
Maybe the belt is old and slick and it softens up when it gets warm? I'd change the belt if it bothers you.
|
Re: Power Steering ..SqUeeAlL.. ?
It was an old.. NEW belt! [2 to 5 yo in my parts box.. Is dat a prob?] Ha!
Think it was a cheaper ($10) belt .. as opposed to a luxury option belt @ $16+ >> Afraid to tighten TOO much.. just guessing.. but very tight! Doesn't bother me too much .. cuz SO MUCH BETTER THAN BEFORE O-RING/FLUID SWAP! But Yes.. A little embarrasing to turn heads repeatedly.. Ha! :lol: Thanks.. :D |
Re: Power Steering ..SqUeeAlL.. ?
Try tightening it just a little bit more....
|
Re: Power Steering ..SqUeeAlL.. ?
Try a different (old?) belt. Some belts do not make proper contact with the pulley. Sometimes the grooves are not deep enough in the belt. I've seen it once before.
|
Re: Power Steering ..SqUeeAlL.. ?
Ya know.. I just worked on my SVX yesterday.. to flush coolant. I noticed a clicking (instead of squealing) when running engine to heat/flush coolant. I put stop-squeek on the AC belt (which looked a little loose) .. and it stopped the clicking sound!
Hoping it's that belt! Will know today after work.. about 90 degrees here. I think the heat of sitting in high temps causes the AC to stress at first when starting up??? causing that belt to slip??? :confused: I'll know at 8 pm tonight when I get off. :cool: Thanks.. :D |
Re: Power Steering ..SqUeeAlL.. ?
Yep! Dat was it! NO MORE SQUEALING! Hmmm? I was blaming the wrong belt! :rolleyes:
Thanks.. :lol: |
All times are GMT -6. The time now is 10:34 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122