The Subaru SVX World Network

The Subaru SVX World Network (https://www.subaru-svx.net/forum/index.php)
-   Technical Q & A (https://www.subaru-svx.net/forum/forumdisplay.php?f=5)
-   -   Please help me, codes 13 and 29 (https://www.subaru-svx.net/forum/showthread.php?t=46164)

mysvxrocks 09-12-2008 03:41 PM

Please help me, codes 13 and 29
 
What do I do? My car wont start at all. Period. Code 13 is the Cam angle sensor, and 29 is the Crank angle sensor 2.... I dont know what to think/do anymore... I dont even know where those sensors are located. -Dennis

redlightningsvx 09-12-2008 04:04 PM

Re: Please help me, codes 13 and 29
 
Your car has tooooooo many problems.:(

mysvxrocks 09-12-2008 04:27 PM

Re: Please help me, codes 13 and 29
 
Ive fixed everything else.... but as I said to everyone... once I fix it, something else is going to go bad. I cant afford to put any more money into this car... Ive already put too much in. Maybe its time to let the dream go... Though now I cant even start it

pearlm30 09-12-2008 04:34 PM

Re: Please help me, codes 13 and 29
 
Its rare for all sensors to go bad at the same time. Did you check the wiring? There are 2 sensors under the alternator and one next to the battery.
Also timing belt???


Quote:

Originally Posted by mysvxrocks (Post 563781)
What do I do? My car wont start at all. Period. Code 13 is the Cam angle sensor, and 29 is the Crank angle sensor 2.... I dont know what to think/do anymore... I dont even know where those sensors are located. -Dennis


wannarace928 09-12-2008 04:40 PM

Re: Please help me, codes 13 and 29
 
I had a crank angle sensor under the alternator go bad, my car would crank but not start up.

mysvxrocks 09-12-2008 06:05 PM

Re: Please help me, codes 13 and 29
 
Well it does crank, just wont turn over. if it was the timing belt, wouldnt it not crank at all? does anyone have these sensors they woupd sell. . . i cant afford them from the dealer. . .

TomsSVX 09-12-2008 07:29 PM

Re: Please help me, codes 13 and 29
 
Check the timing belt... That would be my first move. Also check all electrical connections to these sensors and also the gorund wire on the pass side rear of the intake manifold

Tom

mysvxrocks 09-12-2008 07:46 PM

Re: Please help me, codes 13 and 29
 
What would I need to check? Ive never done that before

redlightningsvx 09-12-2008 08:22 PM

Re: Please help me, codes 13 and 29
 
The timing sprokets should bave lines on them to line them up.

TomsSVX 09-12-2008 08:36 PM

Re: Please help me, codes 13 and 29
 
honestly... if it is not starting, I would imagine it totally popped off or has broken.

Tom

mysvxrocks 09-12-2008 09:01 PM

Re: Please help me, codes 13 and 29
 
Opened a cover enough to see in, the belt is still on. And it appears fine.

redlightningsvx 09-12-2008 09:03 PM

Re: Please help me, codes 13 and 29
 
I would check the marks and see if you jumped a few teeth.

mysvxrocks 09-13-2008 05:09 PM

Re: Please help me, codes 13 and 29
 
Fixed the issue. Got all three sensors from a wrecking yard, put them in and it fired right up like nothing happend. Dont know which sensor was out, but at least its fixed.

redlightningsvx 09-13-2008 05:42 PM

Re: Please help me, codes 13 and 29
 
Good you got it fixed.


All times are GMT -6. The time now is 12:29 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122