Power Steering pump overhaul
How hard is it to replace seals, bearings etc.
Does anyone have breakdown of part numbers & prices in order that I can do the refurbishment myself. Oh yes it is for the LSi model. Thanks Steve in New Zealand |
Re: Power Steering pump overhaul
Quote:
Have you got the Work Shop Manuals for the car Steve? Harvey. |
Re: Power Steering pump overhaul
No - sorry have not...I can imagine that it should not take to long to do, just need part numbers / torque settings etc.
thanks Steve |
Re: Power Steering pump overhaul
http://www.subaru-svx.net/photos/files/How-To/41037.pdf
Check out the how to documents, could be more info in there. Good luck. Quote:
|
Re: Power Steering pump overhaul
thankyou for that information - it will help me locate the small leak that I have (which I suspect is the o-ring under the tank).
regards Stephen in New Zealand |
Re: Power Steering pump overhaul
I fully rebuilt my power steering pump as well as a spare I sold on Ebay while going to school for Automotive Technician. It was pretty easy and cost me about $40 a pump. I looked around but, I couldn't find all the part numbers and torque specs. One of these days I should go up to my old school and print them out again off Alldata.
|
Re: Power Steering pump overhaul
Well got that $1.90 o-ring for my power steering pump, pulled out the fluid tank & wow there was not even an o-ring fitted!!!!
I suspect that after 12 years the ring just fell apart. So for 45 minutes work to, remove / fit / clean engine - it was the best $1.90 I ever spend!!!. Thanks to all for the help previous to this posting. Steve in New Zealand 1 OF 1 |
Re: Power Steering pump overhaul
Quote:
But I just wanted to warn caution because it you don't know what you are doing, don't think that document will explain everything. It's a good.. overview at best. (sorry to the guys who wrote it..) |
Re: Power Steering pump overhaul
hmmm... was actually going to ask about this. My pump also needs rebuilding and when I mentioned just o-ring/bearing to the CV/steering guy he kinda looked at me funny and reeled off a list of other components that he said were part of a rebuild (wish I could remember what they are but can't for the moment). I was wondering if he was trying it on, or if replacing the o-ring&bearing was more along the lines of a service than a rebuild.
Tania. |
All times are GMT -6. The time now is 04:28 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122