making a s/c
im making an electric supercharger, looks like the ones you get off ebay but way better, (dont ask lol) but i just needed to know... should i put the little thing before or after the MAF, and i do have a boost guage so i will try to see if i can get a reading from it..., if it works ill show pics and everything but i dont want to be embarrased if its a P.O.S and doesnt even work...:o
|
If you can find a hefty 120v blower and run it off an inverter, you might get some good results
|
you dont know what im doing yet lol, i just need to know whether or not to stick it before or after the maf.....
|
I'd say after the MAF.
|
if you know about r/c cars, then im using a mamba brushless motor, its 8000kv and im using a 3 cell lipo pack with 11.1v,if im not mistaken thats 88000rpm.... and im putting a prop on it and sticking it inside the intake tubing, then i will see if it creates any boost.. if it does, i will put a switch on the bottom of the gas pedal so it turns it on when im at WOT....
|
Unfortunately it will not create a boost which will increase power, as it is incapable of moving the volume of air required. In fact it will probably create an obstruction.
|
hmm... i will soon put the prop on, i will make a video of how much air it blows, i tried the prop on a weaker motor with the 3cell lipo pack and it created so much air it was able to knock over water bottles, so i had to strap it down, to a shoe box to be exact... it started to move the box then the prop came off and shatterd... this was with the very weak motor....
|
off topic but hey, i reached 200 post!!! :eek::D
|
Where are the prop parts going to go when it shatters in your intake? :(
|
dont worry, last time the prop came off was because it was my fault, i moved the motor while she was spinning and the prop hit the box, flung off, hit the wall and it shatterd, but i got a new one, and im making sure it will NOT come off or break when in my intake, if it even makes boost that is... :rolleyes:
|
if I were you I'd put some sort of mesh screen in the intake tube to catch broken parts if failure does occur.
|
This is a very bad idea....... Very, very, very bad...... It does not matter how fast a prop can blow air it does not have the ability to move the volume of air needed to create ANY boost.
|
Quote:
|
If you're going to pursue this, then take lots of pictures, assemble lots of documentation, and anticipate criticism and demands for proof that you've succeeded. With that, good luck!
|
ok sicksubie.... so when you say my s/c cant move the amount of air needed... right? well what if i used and electric leaf blower and hooked it up to my power inverter?? then would it work??? ive actullay seen a gas one on a honda work but it wasnt even set up right at all....
|
All times are GMT -6. The time now is 02:54 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122