Engine Pics!
After successfully completing my head gasket renewal, i've put all the pics of it in my personal locker if anyone wants to see what they're engine looks like on the Inside! lol
Phil 92 SVX (94k) Claret. |
1 Attachment(s)
1 of the pics!
Phil, 92 SVX (94k) Claret. |
Nice looking pics! Great looking angles of the EG33...
-Chike |
Nice pictures :D Kind of fun isn't it? Welcome to the club.
|
FUN Hmmm, Not my chosen idea of fun! lol
Definately an experience! Wouldn't do it again unless i was getting paid next time! :( Phil. |
Quote:
Looking at the pic of the block and the top of the pistons, is the center of the top section of the piston, higher than the edge section around the top ring? A bit hard to see, but it looks like there is a raised section with the valve cutouts in it. If it is higher than the edge, how high is it ? Where did the gasket blow, top or bottom of the block. Thanks Harvey. ;) |
why does it seem that my name is 10x more populer over seas then in the united states? :)
cool pics, hope she runs good now phil |
thanks for the pics anyway. :)
|
Hrvey, it's slightly higer than the rest of the piston, the centre is only about 1-2mm higher, not alot!
Not sure 'exactly' were the gaskets had gone, they looked pretty worn out all round the water jacket, but 1 head was definately warped (had BOTH skimmed the same!) Runs lovely now! Just gotta get the tracking done, Does anyone have the steering geometry specs in their locker? Phil. |
nice pictures!
|
All times are GMT -6. The time now is 10:43 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122