Sunroof seal
My seal is coming loose. How does it attach to the moving part? Does it press fit into it or is it put on using an adhesive?
|
Re: Sunroof seal
Just a press fit.
|
Re: Sunroof seal
So, if mine is coming off, does that mean it is broken in some way. Is there some rubber stuck in a groove or something like that which I will have to remove before replacing the seal?
|
Re: Sunroof seal
Quote:
|
Re: Sunroof seal
The sunroof just unbolts from the mechanism.
The seal isn't much diff. from the main doors seals. Just pressure fit. Been too long for me to remember if there is a tongue & groove. I can tell you that the seam between the two ends should be at the rear. When I had my car painted the shop put it on backwards and it only took a few minutes to remove & reinstall. |
Re: Sunroof seal
1 Attachment(s)
.
65441PA002 (65441PA000; 65441PA001) $175.00 http://www.subaru-svx.net/forum/atta...1&d=1520552053 The seal is one continuous strip. Start at the center of the rear of the sunroof and press it into the groove slightly all the way around. But the time you get around the whole way you want slightly more rubber left over than the space you have to cover (maybe an inch). Then butt the two edges together tightly and push the excess into the groove (in effect compressing it) If you stretch it to fit, it will soon return to its unstretched state and leave a gap between the ends. It may take a couple of tries to get it right . |
Re: Sunroof seal
Quote:
|
Re: Sunroof seal
Just doing a quick search found it for much cheaper somewhere else. Hopefully you didn't purchase yet.
https://www.subaruautomotiveparts.co...xoCAN0QAvD_BwE |
Re: Sunroof seal
Quote:
|
Re: Sunroof seal
Quote:
|
Re: Sunroof seal
Quote:
|
Re: Sunroof seal
Thanks all. I had success putting the new seal on. Much drier now and much less wind noise.
|
All times are GMT -6. The time now is 06:32 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122