JDM style Front bumper cover/spoiler (resurrected)
just fyi, we bought the mold from Steve and will
be starting to make his design in the following weeks. I plan on stocking 3-5 at a time. My next plan of attack is to possibly add our front splitters to the design, make a mold of that and start offering that design too. |
Re: JDM style Front bumper cover/spoiler (resurrected)
That sounds like an interesting concept. All in one. :) :)
|
Re: JDM style Front bumper cover/spoiler (resurrected)
Do you have any pictures, for those of us that have no clue what this looks like?
|
Re: JDM style Front bumper cover/spoiler (resurrected)
+1 for pictures
|
Re: JDM style Front bumper cover/spoiler (resurrected)
Dayle,
How about looking into doing the bumper in urethane vs fiberglass? -Bill |
Re: JDM style Front bumper cover/spoiler (resurrected)
cost to do it out of urethane too costly
These will be made out of the multi-layered fiberlass with flex to them. So a little more forgiving then before. Heres the style for those who have yet to see one. http://svx-motorsport-accessories.st...svxeufrbu.html |
Re: JDM style Front bumper cover/spoiler (resurrected)
Quote:
www.planetsvx.com |
Re: JDM style Front bumper cover/spoiler (resurrected)
Dayle,
What do you expect the order-to-ship time to be? -Bill |
Re: JDM style Front bumper cover/spoiler (resurrected)
Quote:
and yours will ship out the day they arrive :) First on the list :) |
Re: JDM style Front bumper cover/spoiler (resurrected)
Any idea when you'd be doing this with the lip mold?
|
Re: JDM style Front bumper cover/spoiler (resurrected)
Wait, so that picture you linked to is how it would look, or there would be an additional spliter on the bottom of that?
I for one say that cover picutred doesn't go low enough for my taste. |
Re: JDM style Front bumper cover/spoiler (resurrected)
have 4 in stock of the originals
fiberglass, ready to ship, no waiting ! :) $355 plus shipping (trk frt oversized) from Az |
Re: JDM style Front bumper cover/spoiler (resurrected)
Quote:
http://www.subaru-svx.net/photopost/...cp_0018_R_.jpg However, a splitter or a black DTM style lip under would improve it a lot. Joe |
Re: JDM style Front bumper cover/spoiler (resurrected)
Just not feelin' the center intake's height.
I kinda like the back-angle from the bumper, back and down to the chin spoiler part, and a little bit of a lip spoiler would be good... The fog light openings aren't so bad.... maybe could provide additional cool air to the engine bay, or the front brakes... The center intake is just too tall. The OE bumper cover looks more thoroughly developed in that area. The SVX is very low, and very horizontal on the front. Vertical height messes with the lines too much. Personally, I would much rather see a composite hood with a good heat extractor slat, or 2.5RS-style hood vents, or something. It doesn't really need a scoop, but if it were to have one, a Legacy-type, (which new Forester XT also wears) or Saab 9^2x integrated scoop would be better than a periscope-like scoop, like many of the Foresters and Imprezas wore. It seems like a bit of heat extraction would help as much as larger open frontal area. It is hard to ram more cool air into the engine bay, when the air has nowhere to escape from the engine bay, and just raises underhood temperatures, and heat-soaks everything. |
Re: JDM style Front bumper cover/spoiler (resurrected)
Quote:
|
All times are GMT -6. The time now is 12:41 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122