crank sprocket
im trying to take it off but its being a pita. anybody know of a easy way to get it off?
|
tap the two holes with a 10x1.25 metric tap. The use a straight puller to pull it off... DON'T pry it off... I made that mistake
Tom |
I ended up tapping it with an 8x1.25 metric to get it off. It took about 2 hours since i didn't have a straight puller. I took a flat piece of steel and cut two holes in it and used two 8mm bolts put through the steel to pull it off.
|
All times are GMT -6. The time now is 05:13 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122