Trany Questions.
Ok, Ive looked but I can't really find the answers I'm looking for. Maybe someone can help with a couple.
1. I am swapping in an outback trans w/4.44's, and I am wondering, will the transmission resistor mod work on that one too? 2. My "broken" transmission ran and shifted fine, but had no output to the rear drive-shaft. The FWD light was on on the dash, but the FWD fuse is NOT in. Any Ideas? Am I replacing an easy fix trany? |
I would be on the search for a switch... Some people place switches in for various reasons
Tom |
pull the codes on your tranny.... im going to guess you will see code 24
|
if the light is on, the FWD circuit has been completed. So there may be a code for the sol. C but this surely will not fix the FWD light(circuit) issue at hand
Tom |
Quote:
2. The problem with your existing transmission would appear at the worst, to be confined to the transfer case, which is accessible without removing the transmission as a whole. Indications are such that you should do some thorough checking, before making a change. ;) |
All times are GMT -6. The time now is 01:00 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122