Stereo Power Current drop when starting
Hello all,
After wiring in my new DVD player and Raspberry Pi I have decided I would like to make it so when starting I do not lose current to the DVD player and Raspberry Pi. I have it wired to the stereo power and running through a converter to supply the correct 1A. Is there a way to modify the wiring to the stereo to avoid the current drop but maintain the Pi and DVD player. Anyone have experience doing something similar to wiring? Edit: The dvd player did not come wired for power antenna, could someone elaborate on how the antenna is sent up and down? Adding a switch is not out the question but I would like to make this antenna function. |
Re: Stereo Power Current drop when starting
For the antenna, sending a 12v+ to that wire will cause the antenna to go up. When you remove the 12v the antenna will go down. I have an extra park light/heated mirror switch in place of the coin holder that interrupts the signal from my stereo since I hardly ever listen to the radio.
|
Re: Stereo Power Current drop when starting
Quote:
|
All times are GMT -6. The time now is 03:21 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122