RX8 Wheels
Although I have had these wheels for some time, and they were on my old Silver. I finally got around to putting them on my Laguna. Just put a set of new Falken Azenis ST-115 235-40-18. Dont care for the tires as much as the Michelin pilot sports though. Someone could probably get a 245 to fit, but it might rub in the rear.
Just thought I would post a pic for anyone thinking about putting RX8 wheels on there SVX. wheel specs. *50mm offset *18" x 8" Alloy *2004-2007 Mazda RX8 *Bolt Pattern 5x114.3 *Lug centric mounting *2lbs lighter with tire than stock wheel and tire. enjoy http://a338.ac-images.myspacecdn.com...6d07ae11d1.jpg |
VERY nice!:cool: I love the way these wheels look on the SVX!
|
The rx8 rims look sharp:).
I was hung up on either the rx8 rims or the muranos, but the murano deal came first. Now that you said its about 2 pounds lighter per rim... I may have to reconsider :eek: |
rx8 wheels ftw
post count +1:rolleyes: |
Oh.... almost forgot. Not shown in this pic, but center caps from I think an 02 Legacy fit quite nicely. Just so people dont ask what model Mazda it is:lol:
|
Good thinking! I was wondering if you were going to modify/fill the centers.
|
Good look.
|
look good...murano wheels feel more heavier and stabil.
|
Quote:
Nice one. Joe:) |
Rims
I question whether the tire/rim combo actually weighs less than the OEM. The rim itself is 2.4 pounds heavier than the OEM.
Also, instead of depending completely on lugcentric mounting, I recommend buying hubcentric spacers. Lee |
Quote:
I did use hub centric rings, just couldent remember at the time what dimensions were. I think it was 60mm RX8 hub and 48mm SVX hub? Can remember off hand. Basicly, my point was you need new lugs to mount them. Should have clearafied that better |
I plan on going with RX-8 rims sometime over the winter, hopefully with a set of 255/35/18 Goodyear Eagle F1 GS-D3's.:D:D
|
Quote:
|
Quote:
|
Oh, and I know LAN is running 255/35/18's on his 8" wide wheels with a 49mm offset, so they should work (in theory). A guy around here with a 94 had the plastic lip around the bottom of the rear fender removed to help with his clearance issues. He's running 17" Mustang wheels that he had machined to reduce the offset as much as possible. He said the tires would only touch the plastic, and once it was gone everything was fine.
|
All times are GMT -6. The time now is 01:18 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122