Mounts needed
 

Hello everyone :D

I need part #s for some mounts that are bad.... I need the 2 little round ones in the back by the diff.... I need the tranny mount thats on the cross member. I also need shock mounts.... Thank you
for all the help that can be provided....

ok, i know it might sound a little redneck but you might want to try 3m window weld? i did it about 6 months ago and it's still holding strong. it was way easier, cheaper, faster, and supposably if done right it will easily outlast the oem ones. only time will tell. i was really happy with the results. let me know if you want pics and to know how i did it.

here is a cool link to the window weld stuff that some guy did a how-to on.
http://importnut.net/motormount.htm

I have an extra set of durometer 80 diff mounts I made a while back.. $75 for the pair if you are interested

Tom

oh and a trans mount too but its just a stocker and it is used

Tom

Yeah I would definitly like to see pics specially if it was done on the SVX!! :D

Do you think I can do this also with my shock mounts??

Thank you all for your input and help!!!! :D

if you want to make them yourself, don't use 3m stuff, get the urethane and do it the right way...

Tom

Where do I find urethane @, and how mush $$ is it?? Also how well does it hold up to OEM?

Thank you all :D

McMaster&Carr