Does a 9005 bulb reverse harness socket exist???
 

OK, to clarify... the car plugs directly onto the 9005 bulb. I need a wire socket that is like the BULB side, so that I can plug into the car harness at that point.

(I am making a custom harness for my german bulbs...) The german lights use h3 for the highbeams.

We use h3 for the foglights.

Now, for those who know what the foglight harness looks like on the lamp housing side, you have the bulb cover, with the wires going thru it. You have 2 flat blade connectors for the bulb inside, and a harness plug on the outside.

b/c I have h3 highbeams, I need to have 2 flat connectors (easily made) on the inside, and a 9005 socket on the outside.

They must exist for things like 9005 HID retrofits. I did a look around any didnt find any...

Re: Does a 9005 bulb reverse harness socket exist???
 

Re: Does a 9005 bulb reverse harness socket exist???
 

I love you.

Re: Does a 9005 bulb reverse harness socket exist???
 

If you're cheap like me you can get out the dremmel and 4 burnt bulbs and go to town. If I had to do it again I'd go with those.

Re: Does a 9005 bulb reverse harness socket exist???
 

Ohhhh boyyyyy...

Re: Does a 9005 bulb reverse harness socket exist???
 

I am poor, but not cheap. :rolleyes:
Nah, I've been in your position before (like with my broken foglight housing...), but when I can, I try to go as professional as possible... even if I have to wait.

But THIS time.... harness is on the way. :cool:

Re: Does a 9005 bulb reverse harness socket exist???
 

:D


123456789

Re: Does a 9005 bulb reverse harness socket exist???
 

They actually came out quite well. When you dremmel away the old housing you're left with a nice blade for a connector. Solder it on, heat shrink it and voila. Now I'll leave you two alone.