A/C condenser swap...any gotchas?
I have the factory shop manual, so I'll check to see what all I need to do in order to swap out the old Condenser for a new one. Let me know if there're any tricks/tips/etc for this job. At a quick glance, I'm assuming that I'll need to remove the radiator in order to gain access. I have new O rings too BTW.
Thanks. Ali '92 |
I had my condensor replaced a few years ago. The radiator stayed in, but both fans had to come out. Once you have made some room you can tip the radiator out of the way.
Dave |
Are you putting R12 or R134 back in?
If R134 do you have the correct type of o-rings? Mine were green in color. |
All times are GMT -6. The time now is 12:00 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
© 2001-2015 SVX World Network
(208)-906-1122